Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Highland Park
Chimney repair in Highland Park usually means preserving masonry that was built between the 1920s and the 1950s, not chasing heavy creosote from a fireplace burning every night. Most of the homes here were designed around wood fires and later converted to gas logs or inserts, so the real work is inspecting and repairing century-old brick, clay flue tile, and mortar crowns before the next freeze splits them open. We know that kind of house. Highland Park homes often carry two or three flues, decorative fireboxes, and chimneys that were built as part of the architecture rather than tacked on. Call (888) 847-8540 and we’ll book a visit. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Highland Park Homeowners Call Chimney Sweep Oak Cliff for Chimney Repair
The work in Highland Park is different from most of the Metroplex, and that’s exactly why people here call a chimney specialist instead of a general handyman. The town is an enclave of mostly pre-1940s and mid-century custom homes, and long-tenured owners on streets like Beverly, Armstrong, and Lakeside expect a documented report, a clear explanation, and discreet work on their property. Sweep-and-go crews don’t fit that standard.
That’s why we work with an industry-recognized brand stack: DuraFlex flexible liner systems for older or irregularly shaped flues, HeatShield ceramic resurfacing for compromised liners that don’t need a full rebuild, plus Gelco and Famco caps and crowns built to proper spec. We use these because they’re what professionals specify, not what’s cheapest to stock. Our technicians have up to 12 years of experience, and every visit produces written findings you can read and keep. We serve Highland Park and the surrounding neighborhoods as one part of a wider service area, and we handle the sweep, the inspection, and any repair we find under one roof. No subcontracting the hard part.
Response into Highland Park is quick from our Oak Cliff base, and we make the trip with the inspection equipment and the materials the job calls for, so a second visit isn’t the default.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Highland Park
Chimney Waterproofing
North Texas heat and humidity leave a Highland Park chimney sitting idle most of the year, and that’s when moisture does its quiet damage. A breathable waterproofing treatment on the brick and crown sheds bulk water while still letting the masonry dry from the inside, which matters on the 1920s-1950s brick common on Beverly and Armstrong. It’s the least expensive way to slow the deterioration that leads to bigger repairs later.
Mortar Repointing
When the mortar joints between your bricks start to recede, crumble, or wash out, repointing restores them. Highland Park chimneys have had decades of freeze-thaw cycles, and the mortar wears faster than the brick. We rake out the failed joints and pack in fresh mortar matched to the color and composition of the original, so the chimney looks right and holds together. On a house with several flues, that often means working around decorative detailing as much as doing the repair.
Chimney Rebuilding
Some Highland Park chimneys are past repointing at the top, especially where a spalled crown has let water soak down into the brick for years. Rebuilding the affected section, usually the crown and upper courses, resets the moisture barrier and restores the structure. Because the town’s aesthetic review board holds chimneys to a strict standard, we match brick and mortar to what’s already there rather than dropping in a generic replacement. If a full rebuild isn’t warranted, HeatShield ceramic resurfacing can restore a compromised liner without tearing out the entire chimney.
Spalling Brick Repair and Flashing Repair
Spalling is what happens when water gets into brick and a freeze pops the face off; the fix is replacing the damaged brick and stopping the water source. Flashing is usually that source. The metal where the chimney meets the roof fails with age and lets water track into the attic and framing. We repair the flashing and the brick step flashing together, because fixing one without the other just moves the leak. For a deeper look at everything we handle, see our chimney repair services.
Trusted Brands We Service in Highland Park
We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because they cover the parts a Highland Park chimney actually needs: a custom-fit flexible liner rather than a one-size rigid insert, a ceramic resurfacing system most competitors haven’t invested in, and caps built to last. A DuraFlex liner is sized and shaped to your specific flue, not forced to fit. Materials come through the trade supply chain, so the lead time is short and the parts match your chimney’s dimensions. If a job needs a component that isn’t standard, we source it rather than improvising.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Highland Park Homes
- Original clay flue tiles cracked by thermal shock. When a gas log set is used intermittently, the clay tile heats and cools unevenly and develops cracks. Those cracks let moisture and draft problems go unnoticed until smoke backs up on a cold night.
- Mortar crowns spalling after a freeze. A North Texas hard freeze can crack a crown that looked fine in summer, opening a path for water to soak the brick and deteriorate the chimney from the top down.
- Oversized flues left after gas insert retrofits. A flue built for a wood fire is too big for a modern insert, so the appliance can’t draft properly. Condensation follows, and that leads to rusted dampers and a deteriorated smoke chamber.
- Wildlife nests and acorn piles clogging flues. The dense mature oak canopy drops leaves and acorns onto caps and crowns all fall. A clogged flue is the most common cause of a fire that smokes instead of drawing.
Pricing for Chimney Repair in Highland Park, TX
Highland Park chimneys command repair prices that reflect the older masonry and the detailing involved. A typical mortar repointing job runs $450 to $1,800 depending on how many flues and how much height are involved. Chimney waterproofing usually runs $300 to $700. Flashing repair runs $250 to $650. Spalling brick repair runs $400 to $1,500 by the count of damaged brick. A partial or full chimney rebuild runs $2,500 to $8,000 or more, since matching original brick and mortar adds labor. A sweep and inspection to find the problem runs $150 to $450. A written estimate sets the final price, and every repair is scoped from the report you receive first. Call (888) 847-8540 for a free estimate.
We Also Serve Cities Near Highland Park
Highland Park sits inside a tight ring of older neighborhoods, and the homes next door carry the same kind of chimneys. We serve homeowners in Highland Park and the nearby cities of East Dallas, Lakewood, Uptown, and University Park. Same equipment, same report, same approach to matching original masonry. If you’re just over the line, we can help.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Highland Park
Yes. Unused flues still collect moisture, animal debris, and deteriorating mortar, and an annual inspection is the only way to catch those problems before they spread. In a Highland Park house with multiple appliances, each flue is a separate system with its own condition. One visit checks them all and gives you a written report on each.
Yes. Custom-fabricated copper or masonry-clad caps are the norm here, and off-the-shelf galvanized caps are routinely rejected. We measure the chimney, match the profile and finish to the original brick and Spanish tile, and source the cap through Gelco or Famco. That keeps the chimney functional and keeps the aesthetic review off your back.
Repointing replaces the failed mortar in the joints; tuckpointing goes a step further and adds a contrasting mortar that visually sharpens the joint lines. On a 1920s or 1930s Highland Park chimney, repointing is usually the structural fix, and tuckpointing is a cosmetic add-on when the brickwork is meant to be seen. We’ll tell you which your chimney actually needs.
Because the original clay flue is oversized for the insert and the smoke chamber has no proper transition, so the appliance can’t draft. The usual fix is a stainless liner sized to the appliance and a repair to the smoke chamber. A Level 2 inspection documents the liner cracks and any spalling so you can see the reason before a single repair is quoted.
The canopy drops leaves and acorns onto caps and crowns all fall, which clogs flues and holds moisture against the masonry. A clogged flue is the most common cause of a fire that smokes. An annual inspection and a properly fitted cap handle it before it becomes a repair.
If your Highland Park chimney has been sitting quiet since last winter, now is the time to have it looked at, before the first cold night turns a small crack into a smoky living room. We’ll show you exactly what we found and what it means before we quote a repair, and we’ll tell you plainly when work can safely wait. Call (888) 847-8540 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Written by the team at Chimney Sweep Oak Cliff.