Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Lakewood
If your Lakewood chimney is missing a cap or has a cracked crown, rain, birds, and squirrels have an open door into your flue. We fix that with caps and crowns sized for the older brick chimneys this neighborhood is full of, and we show you camera evidence before recommending a thing. Our technicians have up to 12 years of experience, and we answer 24/7 at (888) 847-8540. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Lakewood Homeowners Call Chimney Sweep Oak Cliff for Chimney Cap & Crown
Most of the chimney calls we get from Lakewood aren’t about a fireplace that gets burned hard all winter. They’re about a 1920s Tudor or Colonial cottage where the original chimney was never capped, and nobody noticed the nest in the flue until the first cold snap sent smoke back into the living room. That’s the kind of job we know well here.
Our technicians have up to 12 years of experience on both the traditional masonry chimneys common along the Lakewood streets and the factory-built inserts going into the newer teardown-rebuilds that now sit on the same blocks. We bring professional-grade cap and crown materials from Gelco and Famco, and we size a custom cap to the actual footprint of a pre-war chimney instead of forcing a stock unit to fit. You get a written report of what we found and what it means before we quote any repair.
We treat Lakewood as a full service area, not a drive-by stop. When a cap is failing or a crown has cracked, we can handle the cap work and the crown work and the inspection in one visit, so you’re not chasing down a second contractor for a related problem.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Lakewood
The cap and the crown are two different pieces doing two different jobs. The crown is the sloped concrete or mortar top of the chimney that sheds water away from the brick. The cap is the metal hood above the flue that keeps rain, animals, and sparks out. On Lakewood homes we often find both in bad shape at once, and our chimney cap & crown scope covers the repair or replacement of either.
Cap Installation in Lakewood
A new stainless cap with a spark arrestor keeps rain and wildlife out of the flue and keeps embers off the roof. On the pre-war chimneys here, the flue opening is often narrow or offset, so the cap has to be built to fit rather than pulled off a shelf. We measure the actual crown and flue, then mount a cap sized to that footprint.

Cap Replacement in Lakewood
If a cap is rusted through, bent, or held on with hardware that’s pulling loose from soft historic brick, replacement is usually the cleaner path. We remove the old unit, check the flue while it’s open, and set a new Gelco or Famco cap with proper fasteners into sound masonry. You’ll see photos of the mount before we close it up.

Crown Repair in Lakewood
A failing crown is the single biggest water problem we find on Lakewood’s older chimneys. Many original 1920s crowns have little or no overhang, so water runs straight down onto the soft brick and causes spalling and mortar loss. Repair means grinding out the loose material and rebuilding the crown with a proper slope and overhang so water sheds clear of the masonry.

Crown Coating in Lakewood
When the crown is cracked but still structurally sound, a flexible crown coating can seal the surface and bridge small cracks without a full rebuild. It’s a repair path that buys years on a crown that doesn’t yet justify tear-out. We only recommend it when the camera and a close look show the crown is a candidate; if the crown is crumbling at its core, coating would just hide the problem.
Trusted Brands We Service in Lakewood
We work with the professional-grade brands the trade specifies: Gelco and Famco for caps and crowns, DuraFlex for flexible liner situations where a flue needs a custom-fit system, and HeatShield ceramic resurfacing when a compromised clay tile liner can be restored instead of rebuilt. We use these because they’re what holds up on a Lakewood chimney that’s been through decades of hot, humid summers and sporadic winter fires. When a repair calls for a specialist component, we can source it and handle it as part of the same job rather than sending you elsewhere.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Lakewood Homes
- Cracked, narrow crowns on 1920s chimneys. Original crowns on these Tudor and Colonial cottages often have no real overhang and crack from years of thermal cycling, letting water soak into the brick. It goes unnoticed until a camera inspection shows the spalling and mortar loss.
- Missing caps and summer nests. Many Lakewood chimneys were never capped, and the hot, humid summers pull birds and squirrels into the flues. Homeowners don’t discover the blockage until the first cold-snap fire fills the house with smoke.
- Narrow or offset clay tile liners. The original flues in many of these homes are too tight or too crooked for a standard sweep brush, so gaps and hidden creosote go unseen. Rotary and camera work is what catches them.
- Deteriorating mortar at the crown edge. On the soft historic brick common here, a cracked crown edge lets water wick into the mortar joints below and slowly loosen the top courses.
Pricing for Chimney Cap & Crown in Lakewood, TX
Pricing here reflects the extra fitting and masonry work the older homes need, so expect a range rather than a flat number. For a typical job in Lakewood:
- Standard single-flue cap installation: roughly $275 – $550
- Cap replacement, including removal of the old unit: roughly $325 – $650
- Custom or multi-flue cap sized to a historic chimney: roughly $600 – $1,200
- Crown coating: roughly $350 – $700
- Crown repair or rebuild: roughly $700 – $1,500
A narrow, offset, or unusual flue opening pushes toward the top of these ranges; a straight flue on a newer insert sits near the bottom. The written estimate from your inspection sets the final price, and the estimate is free.
We Also Serve Cities Near Lakewood
We work throughout this part of Dallas, including East Dallas, Highland Park, Uptown, and University Park, alongside the Lakewood neighborhoods we serve. The chimney stock is similar block to block, which means the same camera-first approach applies whether we’re looking at a cottage here or a colonial a few miles west.
Serving Lakewood, TX – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Lakewood
Yes. Even a rarely used fireplace needs a cap, because an open flue lets in rain, birds, and squirrels year round, and a nest blocks the draft until you light a fire and the house fills with smoke. The cap also keeps sparks off the roof. Call (888) 847-8540 for a free estimate.
Look for visible cracks, crumbling mortar at the top edge, or a crown that sits flat with no overhang to shed water. Staining or spalling on the brick just below the crown is another sign. But the only reliable way to know how far it’s gone is a camera inspection, which we include before recommending crown work.
You need a custom cap when a stock unit won’t cover your flue opening or fit the chimney’s footprint, which is common on these pre-war chimneys. We won’t recommend one without showing you the measurements and photos that prove a standard cap won’t seal it. If a standard cap fits, we’ll say so.
Crown coating seals a sound but cracked crown; crown repair rebuilds a crown that’s crumbling at its core. Coating is a repair path when the crown can still carry a flexible coating; repair is needed when the structure itself has failed. The camera and a close look at the brick tell us which applies, and we show you what we found.
Sometimes. A 1950s clay tile flue often sits inside a chimney built a little differently from the 1920s examples on the same street, so the cap has to match that flue’s actual opening and tile arrangement. We measure before we mount, and we check the liner at the same time so a cap doesn’t go on over a failing flue.
Whether you’re in a Tudor cottage off the main Lakewood streets or a newer build a few doors down, a proper cap and a sound crown keep water and wildlife out of your chimney. We’ll show you the evidence first and tell you plainly when a repair can safely wait. Call (888) 847-8540 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Oak Cliff.