Chimney Cap & Crown in Oak Cliff, TX | Chimney Sweep Oak Cliff

Chimney Cap & Crown in Oak Cliff - Measured and Fitted, One Price

Caps and crowns measured on your actual flue rather than fitted from a generic box, with one written price covering the part and the fitting.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Cap & Crown for Oak Cliff Homeowners

If your chimney cap is rusted through, bent off its base, or missing entirely, the flue is open to whatever Oak Cliff weather and wildlife send down it. Rainwater runs straight into the smoke chamber, squirrels and birds nest in the flue, and the cast crown below it starts cracking with every wet spell and hot burn cycle. Our technicians have up to 12 years of experience and carry caps and crowns sourced from Gelco and Famco, so we can usually handle the whole repair same-day. We’ll tell you exactly what we found and what it means before we quote a repair. Call (888) 847-8540. We answer 24/7, with fast dispatch from 7am to 7pm.

Call (888) 847-8540

What Our Chimney Cap & Crown Service Includes

Cap and crown work is one system even though it’s two parts. The cap keeps water and animals out of the flue; the crown sheds water off the top of the masonry so it doesn’t soak into the brick and mortar below. We treat them together because a new cap over a failing crown just moves the leak down a few inches.

Cap Installation

A chimney cap is a metal hood that sits over the flue opening on legs or a mesh body, sized to the flue and secured through the crown. You need one when the flue is open, when you’ve just had a liner installed, or when the old cap pulled loose in wind. We measure the flue, match the cap to the liner type, and fasten it so it doesn’t rattle or shift.

Cap Installation

Cap Replacement

Replacement is for caps that have rusted through, warped, or lost their mesh screens to corrosion. A holed cap lets water in; a screenless cap lets birds and squirrels drop nesting material straight into the flue. We pull the old cap, check the flue tile and crown underneath for damage the failing cap may have allowed, and fit a new one from our Gelco and Famco lines.

Cap Replacement

Crown Repair

The crown is the sloped masonry or concrete cap at the very top of the chimney, and it’s what keeps water out of the brick below. Cracks, spalling, or a crown that has pulled away from the flue tile needs repair before water ruins the structure. We rebuild failing crowns to a proper slope and bond them to the flue so water runs off instead of sitting.

Crown Repair

Crown Coating

Crown coating is a flexible sealant membrane applied over a crown that’s cracked but still structurally sound. It’s a good fit when the masonry is intact but the surface is checking and letting water in at the seams. Coating is cheaper than a rebuild and buys years of service, and we’ll tell you honestly when coating is enough and when it isn’t.

Multi-Flue Cap

A multi-flue cap covers two or more flues on a single chimney with one top-mounted hood, which looks cleaner than a cluster of individual caps. It’s common on Oak Cliff homes with a fireplace flue plus a furnace or water heater flue in the same stack. We build these to fit the actual footprint of your chimney top, with screened sides for ventilation.

Custom Cap

Some chimneys have oversized flues, irregular shapes, or a stack that a standard cap won’t fit properly. A custom cap is fabricated to the exact dimensions of your flue and crown instead of forced to fit with adapters. We take measurements on site, and because we work with Copperfield and Olympia Chimney product lines, we can spec components that most local competitors have to special-order.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (888) 847-8540

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Brands We Service for Chimney Cap & Crown

We work with Gelco and Famco cap and crown products because they’re what professionals specify rather than what’s cheapest to stock. Both lines are built for real weather exposure, with heavier gauge metal and proper screened bodies, which is why we use them on Oak Cliff roofs instead of generic hardware-store caps that rust out in a few seasons. We also work with Copperfield components when a job calls for a specific fit.

On the liner side, we use DuraFlex flexible liner systems and HeatShield ceramic resurfacing, and cap work often uncovers a flue that needs one or the other once we’re up top. We’ll tell you exactly what we found and what it means before we quote. Whether you have Gelco, Famco, Copperfield, or any other make, we can help.

Signs You Need Chimney Cap & Crown Right Now

  • The cap is rusted, bent, or gone. Rust perforation or a missing cap leaves the flue open to rain and animals, and water in the smoke chamber is the start of a much bigger repair. If you can see daylight down the flue, call us.
  • Birds, squirrels, or wasps in the firebox. Animals nesting in an uncapped flue block the draft and create a fire hazard when nesting material piles up near the damper. A screened cap solves it.
  • Cracks in the crown or a crumbling top. Visible cracks, flaking concrete, or a crown separating from the flue tile mean water is getting into the masonry. This one gets worse every rainy season, so it’s worth handling early.
  • Water stains on the ceiling or smoke chamber walls. Damp patches near the chimney chase or a musty smell after rain point to a failing crown or cap seal. Fixing the top is almost always cheaper than repairing the damage below.
  • Mortar crumbs on the roof or top of the crown. Falling mortar bits signal the crown and upper masonry are breaking down. A proper crown repair stops the decay before the stack needs rebuild work.

Our Chimney Cap & Crown Process – Step by Step

  1. 1
    We inspect before we quote. We look at the cap, the crown, the flue tile, and the top course of masonry, and we check the attic side of the chase where we can see it. You get a written report of what we found, not a verbal guess.
  2. 2
    We photograph the problems. Camera inspection and photos included with the report mean you’re not taking our word for a cracked crown or a rusted cap. You can see exactly what needs work and what can safely wait.
  3. 3
    We size and spec the right part. We measure the flue and crown footprint and match the cap to the liner type, selecting from Gelco, Famco, or Copperfield as the job fits. No one-size-fits-all cap forced onto an irregular flue.
  4. 4
    We install and seal. The cap gets fastened through the crown with proper clearance for draft, and crown repairs or coatings are applied to a clean, prepped surface so the bond holds through hot and cold cycles. We check the finished top before we call the job done.
  5. 5
    We clean up and walk you through it. We leave the roof and yard as we found them and review the photos and the report with you. If a flue liner needs HeatShield resurfacing or a DuraFlex liner, we’ll say so plainly and explain why.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Chimney Cap & Crown Cost in Oak Cliff?

Most chimney cap and crown work in Oak Cliff runs a few hundred dollars for a straightforward single-flue job, and more when a crown rebuild or a custom-fabricated multi-flue cap is involved. A typical cap installation on a single flue runs $185 – $385 depending on cap size, material, and whether the old cap needs to be cut off. Crown repair or a full crown rebuild typically runs $300 – $900, depending on how much of the top needs to be removed and re-poured and how accessible the chimney is. Crown coating over sound masonry usually comes in lower than a rebuild. Multi-flue and custom caps run higher because they’re built to the actual footprint of your stack.

What affects the price: flue count, cap size and material, the condition of the crown and top masonry, roof pitch and access, and whether animal nesting or a liner issue turns up once the cap is off. The written estimate sets the final price, and the estimate itself is free.

To avoid overpaying, ask for photos before you approve anything, and ask whether the crown actually needs a rebuild or whether coating will hold. Nothing is recommended without camera evidence you can see for yourself, and we’ll say plainly when a repair can safely wait until later.

Chimney Cap & Crown Near Oak Cliff – Our Service Area

We work throughout Oak Cliff and nearby areas, including Redbird, Cockrell Hill, Kessler Park, and out toward Duncanville and DeSoto. If you’re closer in, we also cover Uptown, Highland Park, Bluffview, East Dallas, University Park, and Lakewood. Same-day scheduling is often possible depending on the day and parts, and our crews dispatch Sunday through Friday, 7am to 7pm. Learn more about our chimney cap & crown work across the area, or read up on chimney cap & crown for Redbird homes.

Serving Oak Cliff, TX – Our Local Coverage Area

We serve Oak Cliff and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Chimney Cap & Crown in Oak Cliff

Schedule Your Chimney Cap & Crown Service in Oak Cliff Today

A failed cap or crown is the cheapest chimney repair you’ll make, and the most expensive one to skip. We’ll inspect the top, show you photos, and quote the work with no pressure. Call (888) 847-8540 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm. Find the full range of our Chimney Sweep Oak Cliff services and get booked. Need nearby coverage? See our chimney cap & crown work in Cockrell Hill. If you’re booking a repair alongside your annual visit, our chimney inspection and chimney repair pages cover what else we check on the same trip.

Written by the team at Chimney Sweep Oak Cliff.

Why Oak Cliff Chooses Chimney Sweep Oak Cliff

We set the standard for chimney cap & crown in Oak Cliff.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Oak Cliff

Getting your chimney cap & crown handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney cap & crown needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cap & crown pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A local pro comes out to measureLicensed and insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Oak Cliff Customers Say

Trusted by homeowners across Oak Cliff and surrounding areas.

★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Kristen Schaefer
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Rachel Novak
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Adam Fletcher

Ready for Chimney Cap & Crown in Oak Cliff?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and here with fast help in Oak Cliff.

(888) 847-8540

Request a Free Estimate in Oak Cliff

Tell us about your chimney cap & crown needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Chimney Sweep Oak CliffChimney Sweep RedbirdChimney Sweep Cockrell HillChimney Sweep DuncanvilleChimney Sweep DeSotoChimney Sweep Kessler ParkChimney Sweep UptownChimney Sweep Highland ParkChimney Sweep BluffviewChimney Sweep East DallasChimney Sweep University ParkChimney Sweep LakewoodChimney Sweep Grand PrairieChimney Sweep LancasterChimney Sweep Cedar HillChimney Sweep Glenn HeightsChimney Cap & Crown Oak CliffChimney Cap & Crown RedbirdChimney Cap & Crown Cockrell HillChimney Cap & Crown DuncanvilleChimney Cap & Crown DeSotoChimney Cap & Crown Kessler ParkChimney Cap & Crown UptownChimney Cap & Crown Highland ParkChimney Cap & Crown BluffviewChimney Cap & Crown East DallasChimney Cap & Crown University ParkChimney Cap & Crown LakewoodChimney Cap & Crown Grand PrairieChimney Cap & Crown LancasterChimney Cap & Crown Cedar HillChimney Cap & Crown Glenn HeightsFireplace Repair Oak CliffFireplace Repair RedbirdFireplace Repair Cockrell HillFireplace Repair DuncanvilleFireplace Repair DeSotoFireplace Repair Kessler ParkFireplace Repair UptownFireplace Repair Highland ParkFireplace Repair BluffviewFireplace Repair East DallasFireplace Repair University ParkFireplace Repair LakewoodFireplace Repair Grand PrairieFireplace Repair LancasterFireplace Repair Cedar HillFireplace Repair Glenn HeightsChimney Inspection Oak CliffChimney Inspection RedbirdChimney Inspection Cockrell HillChimney Inspection DuncanvilleChimney Inspection DeSotoChimney Inspection Kessler ParkChimney Inspection UptownChimney Inspection Highland ParkChimney Inspection BluffviewChimney Inspection East DallasChimney Inspection University ParkChimney Inspection LakewoodChimney Inspection Grand PrairieChimney Inspection LancasterChimney Inspection Cedar HillChimney Inspection Glenn HeightsChimney Repair Oak CliffChimney Repair RedbirdChimney Repair Cockrell HillChimney Repair DuncanvilleChimney Repair DeSotoChimney Repair Kessler ParkChimney Repair UptownChimney Repair Highland ParkChimney Repair BluffviewChimney Repair East DallasChimney Repair University ParkChimney Repair LakewoodChimney Repair Grand PrairieChimney Repair LancasterChimney Repair Cedar HillChimney Repair Glenn Heights
Call Now - We Answer 24/7