Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Highland Park
If you’re looking for chimney cap and crown work in Highland Park, the answer is simple: a proper cap install runs roughly $325 – $650 depending on flue count and customization, and a crown repair or recoat usually lands between $285 – $725. We know this town’s chimneys, from the Tudor and Colonial roofs off Beverly to the Mediterranean tile work near Lakeside. Most Highland Park homes predate 1940, and their chimneys were built for wood fires but are used lightly or converted to gas today. That changes what a cap and crown actually need to do. We handle chimney cap & crown work across the Park Cities with a free written estimate before anything is booked. Call (888) 847-8540.
Why Highland Park Homeowners Call Chimney Sweep Oak Cliff for Chimney Cap & Crown
Highland Park isn’t a sweep-and-go town. Properties here often carry two, three, or four fireplaces, and the homeowners we work with on Armstrong and Lakeside want documented findings, not a guy on the roof with a ladder and a guess. Our technicians have up to 12 years of experience with masonry chimneys and multi-flue systems, and we bring the same inspection discipline to a crown recoat as to a full cap replacement. You get written findings before we quote a repair, and you’ll know exactly what we saw and why it matters.
We also know the aesthetic reality here. Highland Park’s strict review rules mean a cap can’t just be functional; it has to blend with original brick. That’s why we source from Gelco and Famco rather than pulling something off a hardware store shelf. The neighborhood is full of century-old masonry and clay tile liners, and we treat preservation as the goal, not the upsell.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Highland Park
Cap Installation
A properly fitted cap keeps water, wildlife, and debris out of a flue that may already be oversized from a gas retrofit. In Highland Park, where acorns and leaves pile up under the oak canopy, a cap that fits tight and sheds clean is not optional. We size each cap to the actual flue opening, not a generic dimension.

Cap Replacement
Old caps rust at the seams and screen out at the mesh, and the corrosion often hides until a fall rain blows sideways into the flue. We swap rusted or undersized caps for stainless or heavy-gauge models that hold up to North Texas weather. If the existing cap was custom, we match the profile so the roofline stays consistent.

Crown Repair
The crown is the concrete cap on top of the chimney that sheds water off the masonry below. Highland Park’s freeze-thaw cycles crack crowns, and once water gets behind them, spalling brick follows. We repair cracks and reseal joints where the structure is sound, and rebuild where it isn’t. Repair versus rebuild is a call we make on evidence, and we’ll tell you plainly when work can wait.

Crown Coating
On a crown that’s structurally sound but showing surface wear, a proper coating adds years without a full rebuild. HeatShield ceramic resurfacing is a specialist product we use for liner restoration, and crown coatings get similar attention: prepped, cured, and matched to the masonry. This is the maintenance path for Highland Park homes that don’t need the heavy repair.
Trusted Brands We Service in Highland Park
We work with DuraFlex flexible liner systems, HeatShield ceramic resurfacing, Gelco and Famco caps, and Olympia Chimney components. On a Highland Park chimney with an irregular flue or a retrofit insert, DuraFlex lets us custom-fit a liner rather than force a rigid insert into a space that wasn’t built for it. HeatShield lets us restore a compromised liner without tearing out the whole chimney, which matters on a home where the original brick is part of the architecture. We use these brands because they’re what professionals specify, not what’s cheapest to stock. When a component needs to be ordered, we tell you the timeline up front.
Common Chimney Cap & Crown Problems We See in Highland Park Homes
- Cracked clay tile liners. Original clay tiles crack after decades of freeze-thaw cycles, and once cracked, moisture reaches the surrounding brick and starts the spalling process. A Level 2 inspection catches this before the brick is beyond saving.
- Oversized flues from gas retrofits. A gas insert in a flue built for wood leaves the opening too large, so it drafts poorly and collects moisture. That moisture degrades mortar from the inside. A properly sized cap and a liner assessment fix the draft problem at its source.
- Acorn and leaf clogs. The dense oak canopy over Highland Park drops debris that piles on caps and crowns, traps moisture, and accelerates crown cracking. This is one we see far more often here than in neighboring neighborhoods.
- Crown cracking from freeze-thaw. Sudden ice storms and hard freezes spall brick and crack crowns, and because Highland Park chimneys sit idle most of the year, the damage goes unnoticed until the first cold morning those problems show up as a smoke backup or downdraft.
Pricing for Chimney Cap & Crown in Highland Park, TX
A typical cap installation in Highland Park runs $325 – $650 for a single flue, and a custom cap built to blend with original brick sits at the higher end. A multi-flue cap for a home with two to four fireplaces runs $650 – $1,200 depending on size and material. Crown repair runs $285 – $550 for crack and joint work, and a crown rebuild runs $600 – $1,450. Crown coating is the lighter option at $250 – $450. What moves the number: flue count, whether the cap is custom-fabricated, roof pitch, and how much masonry access the chimney requires. Every price we give is an estimate; the written estimate sets the final price. Estimates are free, and nothing is recommended without evidence you can see yourself.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Highland Park
Our cap and crown work reaches beyond the town line into East Dallas, Lakewood, Uptown, and University Park. If your property sits near the edge of Highland Park, we’ll confirm coverage when you call and get the estimate scheduled. Same crew standards, same written findings, same custom cap approach.
What a Typical Highland Park Cap and Crown Job Looks Like
Most of the masonry chimneys here were built between the 1920s and 1950s, and the original clay flue tiles are showing the effects of decades of freeze-thaw. In a house that’s been retrofitted with gas logs, the flue is often oversized, so it drafts weakly and holds moisture. A qualified local technician typically performs a Level 2 inspection, finds spalling brick and a deteriorating crown, and recommends a custom cap sized to the flue plus a crown coating or rebuild matched to the home’s architecture. The tight oaks that shade Beverly and Armstrong drop acorns and leaves onto crowns every fall, and that debris is a leading cause of premature crown failure here, a combination rarely seen in neighboring Dallas neighborhoods. The job isn’t about chasing heavy creosote from daily wood burning; it’s about preserving century-old brick and keeping the flue working the way it should.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Highland Park
Smoke backup on a gas-log retrofit usually means the flue is oversized for the appliance, so the exhaust cools and stacks rather than rising, especially on a cold morning. The fix starts with a Level 2 inspection: we check flue size against the appliance, look for cracked tile, and check the cap for blockage. Call (888) 847-8540 for a free estimate and we’ll start with what the inspection shows.
A multi-flue chimney should be inspected annually, especially on a home with three or four fireplaces fed by separate flues. One flue can fail while the others work fine, and a single annual visit catches it early. Call (888) 847-8540 to schedule and we’ll inspect every flue, not just the one you use most.
Yes. Custom caps are standard here, sourced from Gelco and Famco and fabricated to fit the brick profile and the flue opening. Highland Park’s aesthetic review rules mean the cap has to look like it belongs, and a custom cap does that without a flashy contrast on the roofline. Call (888) 847-8540 for a free estimate.
The white flakes are efflorescence, a sign of moisture moving through the masonry and evaporating on the surface. It’s serious when it’s paired with spalling, where the brick face is flaking off, because that means the brick is failing from freeze-thaw damage. A crown repair or coating that keeps water out often stops the cycle. Call (888) 847-8540 and we’ll check it against the flue condition.
Small cracks in a sound crown are usually repairable with a coating or joint repair, but a crown that’s broken through or pulling away from the flue needs a rebuild. The call comes down to structure, which we check before quoting. Call (888) 847-8540 for a free estimate and a written finding either way.
Book Your Highland Park Cap and Crown Estimate
If your Highland Park chimney needs a cap that fits and a crown that sheds water, start with a free estimate. We’ll inspect, show you what we find, and quote the work before anything is booked. Call (888) 847-8540. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Oak Cliff.